FiberConX Field Installable Fiber Optic Connectors

 

The new FiberConX™ fiber optic connector is faster and easier to install, making it the field installable connector of choice. This fiber optic connector utilizes proven technology which includes a factory polished ceramic ferrule, fiber stub and mechanical splice, which insure the best possible performance. The FiberConX provides a low loss, reliable and user friendly fiber termination. By eliminating the need for expensive splicing equipment, messy epoxies, polishing films and curing ovens, the FiberConX is the ideal solution for increasing your productivity, as well as your clients. Do it faster, do it easier - FiberConX.

Features & Benefits
Quality zirconia ceramic ferrules Superior scratch resistance, better optical transmission, maintains performance through multiple rematings
Factory manufactured and polished ferrules and housings with pre-radiused PC-polish High quality endface polish ensure low insertion loss, long term performance and consistent mating alignment
No polishing required by the user and no epoxy mixing and waiting Reduced installation time and cost, reduced rework
Unlimited shelf life Unlike epoxy products, FiberConX is never too old to use
Compact convenient tool kit Easy to carry complete tool kit requires no electricity
Instruction cards easy to learn termination process, with effective instructions

Ordering Information

Part No. Description
FC1SP9F0 ST compatible connector for MM 62.5/125 fiber with 900 Micron boot
FC1CP9F0 SC connector for MM 62.5/125 fiber with 900 Micron boot
FC3SP9F0 ST compatible connector for MM 50/125 fiber with 900 Micron boot
FC3CP9F0 SC connector for MM 50/125 connector with 900 Micron boot
FC2SP9F0 ST compatible connector for SM fiber with 900 Micron boot
FC2CP9F0 SC connector for SM fiber with 900 Micron boot
FBNSP3F0 ST 3 mm boot (for all ST connectors above)
FBNCP3F0 SC 3 mm boot (for all SC connectors above)
TL0106 FiberConX complete tool kit (including instruction cards)

FiberConX Products

FiberConX SC Connector

 

FiberConX ST Connector


Connectors available for 50/125 MM Fiber, boots available for 3 mm fiber

 

Installation Process
Cleave the fiber Insert the fiber "Activate" the connection Crimp it

Technical Specifications

Characteristic ST Compatible Connector SC Connector
Insertion Loss 0.3 dB typ 0.3 dB typ
Reflectance -30 dB typ -30 dB typ
Durability 500 cycles <0.2 dB change 500 cycles <0.2 dB change
Storage Temperature -40 to +40°C -40 to +40°C
Operating Temperature 0 to +55°C 0 to +55°C
Tensile Strength 12 lbf (54 N) 12 lbf (54 N)
Field Assembly Time 1 to 3 minutes from cleave to crimp 1 to 3 minutes from cleave to crimp

 

Please click here to download this Data Sheet in a printable version.

This Data Sheet is produced in PDF format for easy on-screen reading or printing. If you do not have Adobe
Acrobat Reader, click here and download the latest version for FREE!